5016-001
To set the Left Margin (only effects Tray 1 and the multipurpose tray):
1.Select Registration from the Diagnostic menu.
2.Select Left Margin from the Registration menu.
3.Select the desired source and resolution. The value is displayed in the operator panel.
4.To change the value, press either Menu> or Menu<. A positive offset moves the margin to the right and a negative offset moves the margin to the left.
5.To save the value press Select.
Note: If RETURN is pressed to exit the Registration menu following a margin value change, but not saved with SELECT, the default value is not changed.
6.To verify that the value has changed, print the Quick Test Page. You may press Go from any of the TOP or LEFT Margin screens to go immediately to the Quick Test page.
7.To exit the Registration menu, press Return.
Note: The range of Left Margin is
The following printer functions may be shifted left or right for either
600 or 1200 dpi:
•Tray 1, Tray 2, Tray 3 - 600 or 1200 dpi
•Multipurpose Tray - 600 or 1200 dpi
The "Quick Test Page" should be printed on letter or A4 paper.
Diagnostic Aids
