Lexmark 5016-001 manual Displays on the operator

5016-001

Message	Status	Action
87 Fuser	This message indicates a	Press Go to clear the
Exhausted	new fuser kit must be	message and continue
	installed. If you do not	printing. The fuser
	have the fuser kit, order it	exhausted intervention
	now.	message is posted every
		time the printer power is
		turned on.
		When a new fuser is
		installed, you must reset the
		fuser counter to zero. To
		reset the fuser counter:
		1. Turn the printer off.
		2. Press and hold the Select
		and Return buttons on
		the operator panel while
		turning the printer on. The
		Configuration Menu
		displays on the operator
		panel.
		3. Press Menu> or <Menu
		until Reset Fuser Count
		appears on the second
		line.
		4. Press Select to reset the
		fuser counter to zero.
88 Color Low	This message indicates	Press Go to clear the
	the color print cartridge	message and continue
	indicated is nearing its	printing. The Supplies
	end of life or empty	status message displays
	condition. If you do not	with the Ready, Power
	have an appropriate extra	Saver, Busy and Waiting
	print cartridge, order it	messages, unless another
	now.	status message of higher
		priority is posted, or until
		you replace the print
		cartridge.
88 Color Cartridge	The printer has detected	You must install a new print
Empty	the specified print	cartridge before you can
	cartridge is completely out	continue printing.
	of toner.

2-26Service Manual