Lexmark 5016-001 manual Transparencies do not feed, or feed improperly from the MPT

5016-001

B Media tries to feed from MPT, 250 paper jam message may display.

	FRU	Action
1	Media	Be sure the media meets specifications.
2	Paper Transfer	Check the sheet bypass paper feed roller and
	Roller	paper transfer roller for contamination, wear or
	Sheet Bypass	anything that would cause the rollers to feed
		improperly.
	Paper Roller	Be sure the rollers operate properly and repair as
		necessary.
3	Sheet Bypass	Check the bypass paper feed clutch for proper
	Paper Feed	operation and repair as necessary. Check the
	Clutch (CL 2)	voltages on CN12.
		Pin #		Voltage	Voltage	Voltage
				Signal	Clutch	Clutch
					Static	Activated
		1 (Brown)		+5 V dc	+5 V dc	+5 V dc
		2 (Red)		KAMIARIO	0 V dc	+5 V dc
		3 (Orange)		DGND	0 V dc	0 V dc
		4 (Yellow)		VP	+24 V dc	+24 V dc
		5 (Blue)		- SL4ON	+24 V dc	0 V dc
		All voltages are approximate values.
		•	If the voltage on pin 4 is incorrect, replace the
			engine board.
		•	If the voltage on pin 5 is incorrect, replace the
			bypass paper feed clutch.

C Transparencies do not feed, or feed improperly from the MPT.

	FRU	Action
1	Transparencies	Be sure the transparencies meet specifications for
		the 5016-001 printer and are designed for laser
		printer applications.

Diagnostic Information 2-37