Lexmark 5016-001 manual Detect Sensor

5016-001

C 241 Paper Jam - Check Tray 1 displays and media jams, prior to the pass through sensor.

	FRU	Action
1	Paper Tray 1	Check tray 1 for anything that might cause the
		paper to jam in the tray, or prevent media from
		exiting.
2	Paper Detect	Check the paper detect sensor lever (flag) in the
	Sensor Paper	paper feed unit assembly for correct operation,
	Detect Sensor	or if broken. Replace the lever (flag), if
	Board	necessary.
		Check the paper detect sensor for correct
		operation. If incorrect, replace the sensor.
3	CST Cable	Check continuity of the cable.
	Engine Board	•	If incorrect, replace the cable.
		•	If correct, replace the engine board.
4	Paper Feed Roller	Check the following paper feed parts for signs of
	Paper Pick up	broken teeth, excessive wear, or binding:
	Roller	•	paper feed unit clutch.
	Pick up Gear	•	paper feed roller shaft, paper transfer roller
			drive gear and paper feed roller.
	Pick up Roller	•	Paper transfer roller and paper transfer roller
	Idler Gears		idler gears.
		• Paper pick up roller, paper pick up gear and
			pick up roller idler gears.

Diagnostic Information 2-101