Lexmark 5016-001 manual New Toner Cartridge Detection Service Check

5016-001

New Toner Cartridge Detection Service Check

This symptom may require replacement of one or more customer replaceable units, designated as supplies or maintenance items, which are the responsibility of the customer. With the customer’s permission, if available, try new print cartridges.

A new cartridge contains a reflector attached to the new cartridge detect lever, mounted inside the cartridge. The reflector reflects light, emitted from the new cartridge detect sensor, back to the sensor, detecting the cartridge. Once the cartridge has been used, the lever moves one turn, allowing no additional reflections.

	FRU	Action
1	Toner Cartridge	Try a new cartridge.
2	New Cartridge	Check the sensor for signs of toner, paper dust or
	Detect/Toner	other contamination on the sensor. Remove
	Level Sensor	contaminants which might prevent light from
	Assembly	reaching the sensor. If the sensor is clean, replace
	Engine Board	the FRU's in the following order:
		1.	New cartridge detect/toner level sensor
	TE Cable
			assembly
		2.	Engine board
		3.	TE cable

Diagnostic Information 2-63