5016-001
Print Registration
Print Registration provides a method to set the printer registration if required. When entering the Print Registration menu, you may select the TOP Margin for Tray 2, Tray 3, and Duplex. If you select LEFT Margin, you must select the source and resolution. Once you have selected the margin, press Menu> or Menu< to change the default value. The margin settings should be verified on Letter or A4 paper.
To set the Top Margin:
1.Select Registration from the Diagnostic menu.
2.Select Top Margin from the Registration menu. The value is displayed in the operator panel.
3.To change the value, press either Menu> or Menu<.
4.To save the value press Select.
Note: If RETURN is pressed to exit the Registration menu following a margin value change, but not saved with SELECT, the default value is not changed. The range of Top Margin offset is
5. To exit the Registration menu, press Return.
The following printer functions may be shifted up or down for either
600 or 1200 dpi:
•Tray 1, Tray 2, Tray 3 - 600 or 1200 dpi
•Duplex - 600 or 1200 dpi
•Multipurpose Tray - 600 or 1200 dpi
