5016-001

Registration Roll Removal

1.Remove all covers, refer to the “Cover Removals” on page 4-2.

2.Remove the LVPS assembly, refer to the “LVPS Assembly Removal” on page 4-10.

3.Remove the C-clip and the shaft bearing from the left side of the registration roll.

4.Unlatch the cable cover bracket.

5.Loosen the registration roll from the left side.

6.Remove the two (2) screws from the paper A guide and remove the guide.

7.Remove the white clip from the right side of the registration roll shaft.

8.Remove the clutch magnet.

9.Remove the second C-clip from the registration roll shaft.

Repair Information 4-27

Page 249
Image 249
Lexmark 5016-001 manual Registration Roll Removal