Lexmark 5016-001 manual Motor Mounting Stay C Assembly Removal

5016-001

Motor Mounting Stay C Assembly Removal

1.Remove the main fan with mounting bracket, refer to the “Main Fan Mounting Bracket Removal” on page 4-12.

2.Disconnect the cable harness from the cable clips [A].

3.Disconnect the cam sensor cable [B].

4.Disconnect the cam clutch cable [C].

5.Disconnect the solenoid cable [D].

6.Remove the two (2) screws from the top of the motor mounting stay assembly [E]. The screw on the top right is shorter and must be replaced exactly as removed.

7.Remove the two (2) screws from the right side of the motor mounting stay assembly [F].

8.Remove the two (2) screws from the bottom of the motor mounting stay assembly [G].

Note: When reinstalling the motor mounting stay assembly, be sure the timing belt remains in place with proper tension.

Repair Information 4-13