Lexmark 5016-001 manual Tray x is correctly installed and Insert Tray x displays

5016-001

C Tray x is correctly installed and "Insert Tray x" displays.

Note: If the detect board for the tray x cable (detect board to interconnect board), LVPS, LVPS fuse, interconnect board, option cable (OP), engine cable (OP) or engine board are failing, this message may display.

	FRU	Action
1	Paper Tray x	Check tray x to be sure the flag molded in the side
		of the tray is not damaged and contacts the sensor
		flag.
2	Option LVPS	Check the fuse in the option LVPS and replace it, if
	Fuse	defective. If the fuse continues to blow, replace the
		LVPS assembly.
3	OP Cable	Check the cables for correct installation and signs
	(Option)	of damage.
	OP Cable
	(Printer)
4	Paper Detect/	Check the paper detect/paper size board for
	Paper	correct operation, If incorrect replace the board
	Size Detect	assembly.
	Board
	Tray x
5	Interconnect	If no problems have been found, replace the
	Board	following FRUs in the order shown:
	Engine Board	1. Interconnect board assembly
		2. Engine board assembly

Diagnostic Information 2-111