Lexmark 5016-001 manual Format Disk from

5016-001

Message	Status	Action
61 Defective Disk	The hard disk installed in	Press Go to clear the
	your printer is defective.	message and continue
		printing. You must install a
		different disk before you can
		perform any disk functions.
62 Disk Full	There is not enough	Press Go to clear the
	space available to hold	message and continue
	the resources you want to	processing. Downloaded
	store on disk.	fonts and macros not
		previously stored in flash
		memory or disk are deleted.
		To reset the printer:
		• Press Menu> or <Menu.
		When the Job Menu is
		displayed press Select.
		• Press Menu> or <Menu
		until Reset Printer
		appears on the second
		line.
		• Press Select.
63 Unformatted	The hard disk installed in	Press Go to clear the
Disk	your printer has not been	message. If the error
	formatted. You must	message remains, the disk
	format the disk before you	may be defective and need
	can download resources	replacing.
	to it.	To format the disk, select
		Format Disk from the
		Utilities Menu.
64	If you place an optional	Refer to your Setup Guide
Disk not in Slot 3	hard disk in slot 1 or 2, this	for information on installing
	message appears on the	an optional hard disk in your
	operator panel. The	printer.
	optional hard disk must be	Note: Do not attempt to
	placed in slot 3 for the
	printer to operate. If you	remove or install the hard
	have another adapter in	disk with the printer power
	slot 3, move it to slot 1 or	on or the power cord
	2 and place the hard disk	connected.
	in slot 3.

2-24Service Manual