Datacryptor Ethernet User Manual | Element Manager Reference |
•Beneath the front panel diagram are five large buttons that provide direct access to management facilities (see the Front Panel Viewer buttons section below).
Note: Pressing F5 while using the Front Panel Viewer will cause a refresh of all displayed settings from the unit.
User Key Material
Adminv2.usr | User key material (containing public and secret keys of user) |
| protected by a default password of: PASSWORD |
|
|
Adminv3.usr | Alternative user key material (containing public and secret keys of |
| user) protected by a default password of: 11aaBB!!PASS |
|
|
The Front Panel LEDs
The Front Panel LEDs indicate the state of the unit.
Indicator Light
State
Indication
Power (green) | On | Unit is powered on | |
| Off | No power | |
|
|
| |
Network (green) | On | Normal operation | |
|
|
| |
| Fast Flash | Link Down | |
|
|
| |
| Slow Flash | Not used | |
|
|
| |
| Off | Loss of Signal, Loss of Synchronization | |
|
|
| |
Error (red) | On | Errors have occurred | |
|
|
| |
| Fast Flash | New errors in log | |
|
|
| |
| Off | No errors | |
|
|
| |
10M (100 Mb | Off | 100 Mbps operation | |
Ethernet unit only) |
|
| |
On | 10 Mbps operation | ||
| |||
|
|
| |
Loopback (yellow) | Off | Normal operation - no loopback enabled | |
(1 Gig and 10 Gig |
|
| |
Slow flash | Host loopback enabled | ||
Ethernet units only) | |||
|
| ||
Fast Flash | Network loopback enabled | ||
| |||
|
|
| |
| On | Host and Network loopback enabled | |
|
|
| |
Alarm (red) | On | Unit is alarmed - Hardware fault | |
|
|
| |
| Fast flash | Unit is not commissioned | |
|
|
| |
| Off | No Alarm | |
|
|
| |
Encrypt (green) | On | Unit is in Encrypt mode | |
|
|
| |
| Slow flash | Standby | |
|
|
| |
| Off | Unit is not in Encrypt mode | |
|
|
| |
Plain (red) | Fast Flash | Unit is in Plain mode | |
|
|
| |
| Off | Passthrough mode not selected | |
Host (green) | On | Normal operation | |
|
|
|
Page 41 |
