Element Manager Reference | Datacryptor Ethernet User Manual |
Configuring SNMP
Datacryptor units record all significant management and error events in their logs for later examination, but can also be configured to report them immediately to a central location, by using the SNMP protocol - to help centralize and simplify management. Events are reported as SNMP Traps V1, v2c, or v3 (as selected on the Traps tab – see below), to a central device (typically a PC) called an SNMP Network Manager. This SNMP Network Manager must be compliant with the SNMP agent version support selection on the Agent Configuration tab – see below. A list of the log and SNMP trap numbers with descriptions is provided as an appendix to this guide.
To configure SNMP, click the SNMP Config button on the unit’s IP Management tab to display the SNMP Config dialog. This dialog has two tabs – the Agent Configuration tab and the Traps tab.
Agent Configuration Tab
The Agent Configuration tab lists the SNMP communities defined for this unit, and provides facilities to maintain the list.
Page 62 | THALES |