Element Manager Reference | Datacryptor Ethernet User Manual |
MAC Address
The destination and source addresses are standard MAC addresses with the added option of using the *wildcard character (see below) to enable a range of addresses to be identified.
When you have set the addresses, select OK to add the new rule to the list. The apply button will then become active.
The Edit and Delete functions requires the user to select a rule prior to clicking the appropriate button. However, if the table contains only one rule and the user presses either the edit or delete button, that rule is automatically selected for the operation.
CAUTION: Care must be exercised when creating filter rules, in order that the intended traffic and only the intended traffic is allowed.
VLAN Settings - Enter the required VLAN ID (a number between 1 and 4094). If this is set to zero, then the MAC addresses are used for in band communications.
Tunneling Settings – An optional fragmentation can be enabled with the Fragmentation Size field in tunnel mode. Encapsulated frames that become larger than the public networks allow, can be fragmented. The fragmentation works like this:
•Outgoing frames including the
•Outgoing frames including the
•Incoming frames on the local interface which are already larger than Fragmentation Size will be truncated to Fragmentation Size and therefore discarded on the remote side.
Note: The Tunneling Settings section, which includes the Fragmentation Size item, is not displayed for the 10Gig Ethernet unit. The 10Gig Ethernet unit does not support Fragmentation Size setting and will never fragment.
Page 84 | THALES |
