Appendix B: Loading Datacryptor Unit Software | Datacryptor Ethernet User Manual |
Completing the Upload
1.Progress of the load is shown via the Upload Progress bar and you will be notified when this is finished. If ‘Save Log Events’ was selected, a dialog will now prompt you for the file name and location for saving the log file.
2.Upload of the application is complete, click Close to shut down the application, or connect another Datacryptor for loading.
3.After the application has been loaded and the unit reboots, the algorithm will need to be loaded into the unit. See the section Commissioning for more information.
Note: Some algorithms may have to be loaded at the factory or under secure conditions.
Page 94 | THALES |
