Connecting to Datacryptor Ethernet Units | Datacryptor Ethernet User Manual |
2.Open a terminal session through a
| Serial Port Parameter |
| Value |
|
|
|
|
|
|
| Baud Speed |
| 115,200 |
|
|
|
| ||
|
|
|
|
|
| Parity |
| None |
|
|
|
|
|
|
| Data Bits |
| 8 |
|
|
|
|
|
|
| Stop Bits |
| 1 |
|
|
|
|
|
|
| Flow Control |
| None |
|
|
|
|
|
|
3.Switch on the Datacryptor unit.
4.As the unit boots the message CONFIG STARTUP Y/N will be shown and all the units LEDs will be lit.
5.Press Y the unit will respond by displaying a short banner and the prompt IPCONFIG>.
6.At the command prompt, type Help for a list of commands available.
Command | Description |
HELP | Display help for a command |
|
|
HELPKEYS | List of keyboard usage in this command interface |
|
|
DEFAULT | Return all IP address and net mask settings to defaults. |
|
|
DISPLAY | Display current IP address and net mask settings |
|
|
IPFORWARD | Enable or disable IP forwarding |
|
|
ROUTE | Add, delete, or display IP routing data |
|
|
SET | Set an IP address and net mask settings |
|
|
SETTIME | Display or set the unit time |
| Ethernet unit) |
|
|
SHOWLOG | Basic display of log contents |
|
|
VERSIONS | Display version numbers of application and bootstrap |
|
|
EXIT | Exit the process and reboot the unit if a parameter has been |
| changed, or just exit if no changes have been made. |
|
|
Note: Before setting the Management port’s parameters, you may want to read the IP Management tab section for some background knowledge on their values.
Page 26 | THALES |