Datacryptor Ethernet User Manual | Overview |
3 Overview
The Thales Datacryptor Ethernet is a high speed, high bandwidth, integrated security appliance. The three models provide different transfer speeds; the 100 Mb Ethernet provides 100 Mbps, while the 1 Gig and 10 Gig Ethernet units offer encryption at Gigabit Ethernet Layer 2 transfer rates.
The Datacryptor Ethernet units come in different case styles; the 100 Mb Ethernet and the 1 Gig Ethernet models are housed in a single unit height
The 100 Mb Ethernet units have standard RJ45 sockets on the front panel for Host and Network connections, while the 1 Gig and 10 Gig Ethernet units have two Small Form Factor sockets on the front panel; these accept a range of transmit/receive interfaces. The 1 Gig Ethernet unit uses SFP type sockets, and the 10 Gig Ethernet unit uses the XFP type sockets.
The host port is connected to the private network and receives the data for encryption. Encrypted data is then passed through the network port for secure transmission over the public network.
The Datacryptor Ethernet is designed to operate as a Layer 2 (Data Link) encryptor. The advantage of this is it makes the unit fully transparent to higher protocols.
The units are housed in a tamper evident chassis with interlock switches that will cause the key material to be erased if the lid is removed.
Product Images
Figure 3-1: Thales Datacryptor 100 Mb Ethernet Front Panel
Figure 3-2: Datacryptor 100 Mb Ethernet Rear Panel
Page 13 |