Lexmark 5016-001 manual OPC Drive Motor Removal, Cam Sensor Removal

5016-001

OPC Drive Motor Removal

1.Remove the right side cover, refer to the “Right Side Cover Removal” on page 4-4.

2.Remove the three (3) screws [A] from the OPC drive motor.

3.Disconnect the OPC drive motor cable [B].

4.Slide the mechanism to the left and out of the printer.

Cam Sensor Removal

1.Remove the right side cover, refer to the “Right Side Cover Removal” on page 4-4.

2.Remove the motor mounting stay assembly, refer to the “Motor Mounting Stay C Assembly Removal” on page 4-13.

3.Unclip the cam sensor connection.

4.Remove the cam sensor.

Repair Information 4-9