Pedestal | Quantity | Part # | |
Screws | |||
|
| ||
M4 x 12mm 6pcs | RS01TM412H | ||
Step Three
Take the base. Please align four holes of the base and four screwholes of the neck, insert the base to the neck, and then insert the 4 screws and tighten them.
Pedestal |
Jacks | Cables | Further | |
Information | |||
|
| ||
|
| See the below | |
COMPOSITE | Video/Audio cable |
| |
| |||
|
| ||
| Audio Cable |
| |
|
| Go to page 5 | |
COMPONENT Y, Pb, Pr |
|
| |
COMPONENT video cable |
| ||
|
| ||
| Go to page 5 | ||
|
| ||
HDMI 1/DVI, 2 | HDMI cable |
|
Connecting YPbPr Component device (Better Video Quality)
To connect a component device, such as a DVD player, follow these steps:
1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to the video output jacks of device via video cable (green, blue and red).
2.Connect the
Notice the left channel jack and plugs are white and the right channel jack and plugs are red.
Note: Y/Pb/Pr jacks are component video. This kind of video signal has better display quality.
Component Video Connection
The picture below is an example of a connection using the component video jack.
The back of TV
| Y |
| Pb |
Video | Pr |
R | R |
Audio L | Audio L |
HDMI
The output panel of HDMI device
Speaker or headphone DVI
PC
DVI
Keypad and Front Panel
Keypad Buttons
If you cannot locate your remote, you can use the keypad buttons on your TV to operate many TV features.
CAUTION:
•Used batteries should be recycled.
•Keep out of children’s reach.
•DO NOT use new and old batteries together.
•Change both the batteries at the same time.
•When not using the remote control for a long time, remove the batteries from the unit.
Remote Control Reception Angle
Use your remote control within the distance and angle range shown below.
20 feet
volume.
CH or CH : Scans up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels.
PICTURE: Switches between the preset picture mode (see page 8).
SOUND: Switches between the preset sound mode (see page 8).
SLEEP: Selects the sleep timer, after which the TV will shut off automatically.
ASPECT: Switches between the preset screen size mode (see page 8).
CC:Selects the closed caption.
MTS: Selects the
NOTE : The keys not listed are for DVD control, they are not available for this TV model.
Initial Setup
If it is the first time you turn on your TV, or you have done Clear Channel List option (see page 10), the initial setup menu appears automatically.
Choosing TV Channel
Tuning To Analog Channels
An analog channel has a channel number beginning with “A”. Input the digital number with numeric buttons directly and press ENTER button to confirm.
For example, to watch analog channel “A51”, press “5”, “1”, “ENTER” on remote control in sequence.
Note: Although there is no analog TV signal available in America, we reserve ATV functions for some expansible use.
Tuning To Digital Channels
A digital channel has a channel number beginning with “D”. Input the
main digital number with numeric buttons directly, then press “ | ” |
button on remote control, and input the sub number at last. |
|
For example, to watch analog channel | ”, |
“1”, “ENTER” on remote control in sequence. |
|
Changing Channels Directly
| Screws | Quantity | Part # |
Longer side |
|
| |
M4 x 14mm 4pcs | RS01PWA414HT | ||
Note:
HDMI, the HDMI logo, and
Audio Out L R
INPUT: Displays the Source Select List.
MENU: Displays the TV Main Menu.
CH : Scans up through the channel list. In the TV menu system, it acts like the up arrow on the remote control and can be used to select
Universal Remote Control Code List
Step One
Please select Menu Language, press the up/down arrow select the language you need. Available languages: English, Spanish
Initial Setup
You can use CH button to increase channel number and CH to decrease channel number. When no OSD (On Screen Display) is used, the up/down arrows can also work as CH /CH buttons.
Please take note of the base direction: |
|
The bottom view of the TV |
|
(Front cabinet faces down) | Longer side |
|
Caution:
Unplug the AC cord when you connect other devices to TV.
The output panel of other AV device
How to Obtain Various Kinds of Input
menu options.
CH : Scans down through the channel list. In the TV menu system, it acts like the down arrow on the remote control and can be used to select menu options.
For Universal Remote Control brands listed below, please use ac companying codes and refer to your Universal Remote Control User Manual for basic Instruction for changing TV code to operate the TV model.
and French.
Step Two
Please select the TV installation mode, press
Initial Setup Wizard will assist you in configuring basic Settings
Selecting Input Source
The back of TV
VOL+: Increases the volume. In the TV menu system, it acts like the
Codes for DIRECTV: 0178, 10178
the up/down arrow select the mode you
Source Select
TV Signal Connection
Side Panel Connections
Sources
After connection is done, press INPUT button on remote control or TV
right arrow on the remote control and can be used to select menu options.
Codes for Time Warner Cable: 0178, 10178
Codes for Cox Communications: 0178
Codes for Comcast: 10178
need: Home, Retail. If you select Home mode, the next option is step three. If you select Retail mode, please refer the step four.
Next
TV
Press INPUT button on remote control to display Source Select list.
The first step in connecting your TV is obtaining the signal. Your TV LED46C45RQ has a back panel, which allows you to receive analog and/or digital television channels via ANT/CABLE jack.
Connecting AV Composite device
top panel to choose the input source you need. See page 7, Basic Operation of TV.
TV Jacks Explanation
left arrow on the remote control and can be used to select menu options.
POWER ( ): Turns the TV on and off.
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775
Step Three
Please choose between Energy Saving and | Press ENTER/RIGHT to go to next page |
| |
|
|
| |
Dynamic mode. You can save more energy | MOVE | SELECT | : Exit |
with Energy Saving. |
|
|
|
AV
Component
HDMI 1
Use up/down arrows to highlight the source you need and press ENTER to confirm.
Before connecting your TV, determine using an antenna or a cable service to obtain the signal.
(Good Video Quality)
Front Panel
About remote control working distance and angle, see the right side.
Learning about Remote Control
Step Four
To choose your TV tuner signal type, press the up/down arrow select
HDMI 2
Media
A. Antenna
Composite connector will be shared with Component Y connector.
Power/Standby Indicator: Light up in red when the TV is in standby
the signal type: Air, Cable.
Connect the antenna to TV via coaxial cable on ANT/CABLE jack of the back panel. You are ready to receive air local digital and analog channels.
B. Cable TV service
Connect the cable TV wall jack to TV via coaxial cable on ANT/CABLE jack of the back panel. You are ready to receive
C. Set-Top Box
If you use a
Note: Do not plug the AC cord until you have accomplished all the connections.
| Cable TV Antenna |
AC | WALL |
OUTLET | |
| |
60Hz | Or |
| CABLE |
| ANT/ |
To connect a composite AV device, such as a DVD player, follow these steps:
1.Connect the COMPOSITE jack on the side of TV to the video output jacks of device via video cable (yellow).
2.Connect the
Notice the left channel jack and plugs are white and the right channel jack and plugs are red.
Note: AV signal belongs to composite video. This kind of video signal has regular good display quality.
Composite Video Connection
The picture below is an example of a connection using the composite video jack.
Audio
Video L R
HDMI
Audio
L R Pr Pb Y
The output panel of other device
Connecting HDMI device (Best Video Quality)
To connect a HDMI device, such as a DVD player, please Connect the HDMI1/DVI, 2 jack on the side of TV to the output jacks of device via HDMI cable.
To connect a DVI device, via DVI port of PC or Device and HDMI jack of TV:
1. | Connect the HDMI1/DVI jack on the side of TV to the DVI port of |
| PC via |
2. | Connect the |
| output jack of computer with audio cable |
| to 3.5mm stereo jack or the |
HEAD PHONE: Connect a 3.5mm headphone for personal audio.
USB: Connect your USB storage device to enjoy music/ photo files on your TV. (Also used for service purpose). HDMI1/DVI, 2:
It provides an uncompressed digital connection that carries both video and audio data by way of an integrated
COMPONENT Y/Pb/Pr: Connect a device that has component video jacks, such as a DVD player. To access device connected to the Y/Pb/Pr jack, press the INPUT button on your remote; then press the up/down arrow to select Component. Press the ENTER button at last to confirm.
• Y/Pb/Pr (Component Video): They provide good |
picture quality because the video signal is separated into |
three components. Use three |
video cables for the connection. When using Y/Pb/Pr, |
make sure you connect left and right audio cables to the |
mode. Light out when the TV is on.
Remote Control Sensor: Remote control IR sensor, which receives infrared ray sent by remote control.
Remote Control Sensor
Power/Standby Indicator
Remote Control Instructions
Inserting Batteries in the Remote
•Remove the cover of battery cabin on the back of the remote control by lifting the cover.
•Insert two AAA batteries, making sure the polarities (+ and
•Place the cover back.
Remote Control Buttons
MUTE ( | ): Reduces the TV volume to its |
minimum level. | |
Press again to restore the volume. | |
POWER ( | ): Turns the TV on or off. |
CH.LIST: Displays the channel list.
FAV.: Adds the current channel to your favorite list, or erases the current channel from your favorite list (if this channel is a favorite channel already).
FAV.+ or
Numeric Buttons: Use these buttons to enter numbers.
“”: To enter a digital channel with a sub- channel, enter the main channel; then, press this button to enter the
ENTER.
Recall ( ): Returns to the previous channel.
EPG: Shows Electronic Program Guide (see page 8).
INPUT: Accesses the available input channels (TV, AV, Component, HDMI 1/2, Media). Use the arrows to highlight options, and press ENTER to select.
CH . LIST
PICTURE
SOUND
Note: please select TV signal type according to the antenna or cable closed circuit TV you use.
Step Five
If you accomplish the initial setup, the TV will search channels automatically.
PICTURE SOUND CHANNEL PARENTAL SETUP OTHERS
AUTO CHANNEL SEARCH | ||
Now Searching... Please Wait... | ||
Return |
|
|
Analog Channels Found: | 1 | |
Digital Channels Found: | 0 | |
|
| 3% |
Press MENU to skip analog signal scanning and | ||
ENTER/EXIT to exit |
|
|
MOVE | SELECT | : Exit |
What to notice:
1. | The channel search access starts from the Analog TV channel |
| searching and ends at Digital TV channel searching. |
2. | The channels that have been found will be stored automatically. |
3. | You can press MENU button to skip analog/digital channel |
Channel Bar
Press the DISPLAY button on the remote control, the channel bar will appear on the top right corner of the screen. It displays the current channel’s information. The following list describes the items on the channel bar.
Air | A2 | Air | D50 - 1 |
| MTV |
| |
| Mono |
| English |
| 480i |
| 1080i |
|
|
ATV | DTV |
If the channel is analog, A is displayed. If it’s a | |
| digital channel, D is displayed. For example, in the |
| pictures above, A2 is an analog channel, and |
| |
| number). |
| Displays the channel label. |
Mono/English | Displays whether the current channel is being |
| broadcasted in stereo or mono. If the current |
| channel is digital, this space will be SAP (Second |
| Audio Program) language. |
AC Power Cord
(Connect after all the other connections are done.)
Cable Connections
The back of TV
Note: 1. HDMI
2. |
AUDIO IN R/L jacks. |
• AUDIO IN L: Left audio channel connection. The left audio |
connector is usually white. For mono audio sources, be sure to use the |
Arrows ( / / / ): Uses the four arrows to highlight different items in the TV menu or change the value. The up/down arrow can also work as CH /CH button, and the left/right
arrow can also work as
MENU: Accesses the Main Menu, or return to
searching. |
4. You can press ENTER/EXIT button to end the channel searching. |
Basic Operations
480i/1080i | Displays the signal resolution. |
Displays the screen aspect ratio, closed caption | |
| and TV rating level of the current program or |
| channel. These are only available for digital |
| channels. |
Choose Your Connections
TV LED46C45RQ supports various connections to other devices (such as DVD, VCR,
4
Audio Video
L R
HDMI
Audio
Pr Pb Y L R
The output panel of other device
DVI device to HDMI jack of TV. For audio signal, please connect audio |
output to |
HDMI Connection
The picture below is an example of a connection using the HDMI video jack.
5
left AUDIO INPUT. |
• AUDIO IN R: Right audio channel connection. The right audio |
connector is usually red. |
ANT/CABLE: Connect to receive the signal from your antenna or cable |
via coaxial cable. |
Digital Audio out: Connect a coaxial cable for digital audio output. |
If the remote control does not work, check these points:
•Are the polarities (+,
•Are the batteries worn out?
•Is there an AC power failure?
•Is the power cord plugged in?
•Is there any interference or block near the remote control sensor?
the upper level of a
FREEZE: Freeze the current screen frame, press again to return to normal. DISPLAY: Displays the Channel Bar (see page 7).
EXIT: Exits the current menu or function.
6 VOL+ or
Remote control part number RE20QP80
Turning On and Off | Adjusting Volume |
Connect the AC cord to power the LED LCD TV. At this time the TV |
|
will enter standby mode and power indicator will turn red. Use Power | Press the VOL+/VOL- button on the remote control to adjust the |
button ( ) on the top panel of TV or on the remote control to turn on | volume. If you want to switch sound off, press MUTE ( ). When OSD |
the TV. After switching off the TV for 5 seconds, you can turn on TV | (On Screen Display) is not used, the arrows left/right can also work as |
again. | 7 |
