5016-001

Message

Status

Action

 

 

 

54 Par x ENA

An External Network

• Be sure the cable

Connection Lost

Adapter (ENA) that was

connecting the ENA and

 

once connected to the

the printer is securely

 

specified parallel port is

attached. Turn the printer

 

no longer responding. The

off and then on again to

 

printer only recognizes the

see if the printer

 

missing connection when

recognizes the

 

the printer power is first

connection.

 

turned on.

• Press Go to clear the

 

 

 

 

message. The printer

 

 

erases any reference to

 

 

the ENA and then resets.

 

 

 

55 Insufficient Fax

This attendance message

Press Go to clear the

Buffer

may appear if the printer is

message and continue

 

processing a print job. The

processing the current print

 

printer must complete the

job.

 

print job before processing

To reset the printer:

 

the fax data. If the fax

 

buffer is not large enough

• Press Menu> or <Menu

 

to hold the fax data, this

 

message is displayed.

until the Job Menu is

 

After this message is

displayed.

 

posted, the printer breaks

• Press Menu> or <Menu

 

the phone connection with

 

until Reset Printer

 

the sending fax printer.

 

appears on the second

 

 

 

The ability of the printer to

line.

 

• Press Select.

 

process fax data exceeds

 

the data transmission rate

 

 

of most fax printers.

 

 

 

 

56 Std Parallel

Data was sent to the

Press Go to clear the

Port Disabled

standard parallel port, but

message. The printer

 

the port has been disabled

discards the data sent to the

 

from the Parallel Buffer

parallel port.

 

menu item.

To reset the printer:

 

 

 

 

• Press Menu> or <Menu.

 

 

The Job Menu is

 

 

displayed.

 

 

• Press Menu> or <Menu

 

 

until Reset Printer

 

 

appears on the second

 

 

line.

 

 

• Press Select.

 

 

 

2-22Service Manual

Page 88
Image 88
Lexmark 5016-001 manual Processing the current print