Lexmark 5016-001 manual Duplex option printed page is skewed, To Skew Correction on

5016-001

K The duplex option printed page is skewed.

	FRU	Action
1	Holder/Arm/	If skewing is a problem, be sure the skew holder
	Roller	assembly is correctly installed in the rear cover.
	Assembly, Rear	The holder should be inclined about 3 degrees. Go
	Door	to “Skew Correction” on page 1-41.
2	Skew Adjusting	Check the skew adjusting rollers in the lower unit
	Rollers	for signs of loose, worn or damaged parts. Repair
		or replace as necessary.

Diagnostic Information 2-131