Lexmark 5016-001 manual Attached

5016-001

Message	Status	Action
54 Serial x Fax	The printer has detected	If the modem has been
Connection Lost	the external modem that	intentionally disconnected,
	was once connected to	you can press Go to clear
	the serial port is no longer	the message and continue
	responding. If the printer	printing.
	has been configured to
	receive faxes from a serial
	port and the Fax Port
	setting is not set to
	disabled, it polls the
	modem. If it detects the
	modem connection is
	missing, it displays the
	attendance message. If
	the modem connection is
	re-established, the printer
	removes the message
	from the display.
54 Std Par ENA	An External Network	• Be sure the cable
Connection Lost	Adapter (ENA) that was		connecting the ENA and
	once connected to the		the printer is securely
	standard parallel port is no		attached.
	longer responding. The	•	Turn the printer off and
	printer only recognizes the
			then on again to see if the
	missing connection when
			printer recognizes the
	the printer power is first
			connection.
	turned on.
		•	Press Go to clear the
			message. The printer
			erases any reference to
			the ENA and then resets.
54 Network x	The printer software has	Press Go to clear the
Software Error	detected that a network	message. The printer
	port is installed and	disables all communications
	cannot establish	to the associated network
	communications with it.	interface. No data can be
		transmitted through this
		interface. You can program
		new firmware in the network
		interface through the
		parallel port after this
		message clears.

Diagnostic Information 2-21