Grid Block 2 Assembly Removal

1.Remove the left side cover, refer to the “Left Side Cover Removal” on page 4-3.

2.Remove the HVPS board assembly, refer to the “HVPS Board Assembly Removal” on page 4-20.

3.loosen the cable clips [A] and loosen the cables from the grid 1 block assembly.

4.Remove the four (4) screws [B] from the grid 2 block assembly.

5.Remove the C-clip from the transfer arm shaft [C].

6.Remove the grid 2 block assembly.

Note: When replacing the grid 2 block assembly, be sure not to damage or deform the high voltage contacts.

Repair Information 4-17

Lexmark 5016-001 manual Grid Block 2 Assembly Removal