Recording
When automatic chapter mark insertion has been selected, however, a chapter mark is inserted automatically at regular intervals; in this case, even if “Chapter (Pause)” is designated, no chapter mark will be inserted when the unit enters the REC pause mode. The session from recording start to recording stop will be considered an independent title (clip). During recording, the playback video/audio signal will be output, but when recording is completed, the screen will return to the Function Menu display.
7Edit List (EDL) Recording
The Edit List (EDL) function allows automated recording of consecutive multiple IN/OUT points by setting the points on an Edit List (EDL). This recorder allows formation of an Edit List by using the contents set with the Function Menu’s APP section
=[Auto Capture] = [IN/OUT Point] command. By pressing the Add to EDL button, the IN/OUT points set are added to the edit list.
APP section = [Auto Capture] = [IN/OUT Point]
Adding to EDL
After construction of an edit list, or after loading a previously recorded edit list, pressing the Function Menu’s APP section = [Auto Capture] = [EDL Command] = EDL REC button will cause recording to be performed automatically in accordance with the constructed list. In accordance with the recorded IN/OUT points, the external VTR is automatically rewound to the designated IN point, and recording begins automatically. When a designated OUT point is detected, the unit automatically enters the REC pause/stop mode.
By using the APP section = [Auto Capture] =
[Chapter Point] command to record chapter point settings in an edit list, not only REC pause positions, but chapter marks can also be inserted at optional points.
The session from recording start to recording stop will be considered an independent title (clip). During recording, the playback video/audio signals are output, but when recording ends, the screen reverts to the Function Menu display.
40
APP section = [Auto Capture] = [Chapter Point]
Settings for Automatic Recording
When using an external VTR with automatic recording, the Function Menu’s SET UP section = [Operation] = [Control Settings] command allows independent settings to be made for the command line and
Settings] = [Control] command to “Local”. The SET UP section = [Operation] = [Control
Settings] = [Port] command allows setting of the command line to
Use the SET UP section = [Operation] = [Control
Settings] = [Time Code] command to set the time code line to either
When “DV” is selected as input, the “IEEE1394” interface is added to the possible selections.
SET UP section = [Operation] = [Control Settings]
