Playing Discs
When playing discs on this unit, the program on a loaded
Selecting Playback Source
The currently selected playback source (also the recording destination) will be displayed on the front panel’s central indicator (DVD1, DVD2, HDD indicator). The [Drive] command on the Function Menu’s STATUS section also indicates the currently selected recording destination/playback source. Use the front panel’s DRIVE SELECT button, or the [Drive] command on the Function Menu’s STATUS section to select the recording destination.
Playing
Begin playback of a DVD disc inserted in the currently selected drive by pressing the PLAY button on the front panel or remote control unit. Stop playback by pressing the STOP button on the front panel or remote control unit.
If a mouse is installed, play can also be controlled from the playback control bar displayed by simultaneously pressing both buttons of the mouse. When a DVD disc has been set for fast play, follow the instructions to begin playback automatically upon insertion of the disc. When “DVD1” or “DVD1&2” is designated, “DVD1” is used. To playback discs on drive 2, “DVD2” must be designated as the playback source. During playback, controls on the front panel and remote control unit act to navigate the DVD in accordance with the disc’s commands.
The 
button performs the same function as the remote control unit’s RETURN button.
English
STATUS section = [Drive]
Playback control bar
STOP PLAY
| STOP |
| PLAY |
REPEAT | DISPLAY | PAUSE |
|
RPT |
| STEP | |
AUDIO |
| SCAN | |
ANGLE SUBTITLE | PREV | NEXT | |
MENU |
|
|
|
TOP |
| ENTER |
|
MENU |
|
| |
SETUP |
|
|
|
1 | 2 | 3 | RETURN |
4 | 5 | 6 | TITLE/CHP |
FRM/TIME | |||
7 | 8 | 9 | FRM/TIME |
0>10 CLEAR SEARCH
DXX2527
Drive indicators
45 |
