Example of System Composition and Recording Component Setup

7System Composition

Note:

 

Input Board

 

 

(optional)

 

By installing the optional SDI

 

 

AES/EBU input board (PRA-

* (Must be purchased separately)

BD11) in the unit’s expansion

Video in

slots, the PRV-LX10 can be

upgraded to support input of

 

SDI

SDI video signals and SDI/AES

Audio in

EBU audio signals.

 

 

 

Video Monitor

* (Must be purchased separately)

Note:

At present, GUI is not output from the VGA (GUI) output connectors.

Note:

By installing the optional SDI AES/IBU output board (PRA- BD12) in the unit’s expansion slots, the PRV-LX10 can be upgraded to support output of SDI video signals and SDI/AES EBU audio signals.

SDI, AES/EBU

SDI AES/EBU Input Board

PRA-BD11

Output Board

(optional)

* (Must be purchased separately)

Video out

SDI

Audio out

REC monitor / GUI display

Video out

Component video

Composite video

S-video

Writer 1

 

Writer 2

Internal HDD

SDI, AES/EBU

SDI AES/EBU Output Board

PRA-BD12

Video in/out

Component video

Composite video

S-video

1 DV

Audio in/out

RCA

XLR

DV

Supported discs: DVD-R (general use),

DVD-RW

Remote control unit

HDD (USB connector)

* (Must be purchased separately)

Keyboard/mouse (USB connector)

* (Must be purchased separately)

Headphones

* (Must be purchased separately)

*BETACAM, Digital BETACAM, and DVCAM are registered trademarks of Sony Corporation.

*DVCPRO is a registered trademark of Matsushita Electric Corporation.

*Check Pioneer’s website for a list of components and systems with confirmed operational compatibility.

1

When using the DV cable, be sure to attach the accessory ferrite core near the end of the cable connected to this unit. Attach the ferrite core as shown.

*The ferrite core is provided to prevent interference with surrounding appliances and this unit, in accordance with European EMC standards (EN55103).

Installing the Ferrite Core

Connect to DV connector on this unit.

Ferrite core

Insert the DV cable into the groove of the ferrite core, and press together until it clicks securely.

*In the event that the DV cable is too thin, double the cable passage through the core as shown.

Cable

12

PRV-LX10 En

Page 12
Image 12
Pioneer PRV-LX10 manual System Composition, PRA-BD11, PRA-BD12, Installing the Ferrite Core