Pioneer PRV-LX10 manual Recording from HDD to DVD, When Finalize, Make Disc and Make Image

Recording

selected titles exceed 4400 MB, reduce the number of titles (see “Title Order Edit” on page 65) or reduce clip size (see “Title Trimming” on page 63).

The disc cannot be removed until the Make Disc process is completed.

EDIT section = [DVD Disc] = [Finalize]

Finalize confirmation dialog

Finalize progress bar (appears during finalization)

Recording from HDD to DVD

Following recording of a video program to the hard disk drive, editing of the DVD menu and title can be performed before final recording to DVD disc.

Use the EDIT section = [DVD Disc] = [Make Disc] command to create discs. Use the EDIT section = [DVD Disc] = [Make Disc] = [Target] command to select the drive “DVD1”, “DVD2” or “DVD1&2” for recording.

A disc can record a maximum of 4400 MB (approx. 4.3 GB (1GB = 1024 MB). When the total volume of the

44

EDIT section = [DVD Disc] = [Make Disc]= [Target]

Use the EDIT section = [DVD Disc] = [Make Image] command to create image files.

The [Target Image] will display in the initial condition the “project name” + the three-character “.img” extension. If the image file name is changed, the image file name will remain the same even if the project name is subsequently changed. For characters supported in file names see the section “About File Names” on page 94.

Note:

The total post-editing program size must be within the capacity of the DVD disc or recording will not be possible.

EDIT section = [DVD Disc] = [Make Image]

Note:

When [Finalize], [Make Disc] and [Make Image]

commands are executed, a DVD-Video is created with the menu set in DVD Menu.

PRV-LX10 En