Pioneer PRV-LX10 manual Message Display, Message Comment

Message Display

7Messages displayed in dialogue box during Function Menu operations

Item	Message	Comment
TV System	Switch TV System	Switches TV system mode. When [OK] is pressed, TV system
		is switched temporarily.
TV System	After 10 seconds, TV System will return to previous	When [OK] is pressed, TV system setting is maintained. Either
	mode.	press [Cancel] or wait 10 seconds to return to former setting.
Network	Network Error, Check Connection.	Check Ethernet cable connection.
Network	Network Settings Error.	There is something the matter with the network. Check that
		the IP address, subnet mask and gateway address are correct.
Text entry	Input Parameter Error.	The entered value is outside the range. Enter the correct value.
HDD format	Delete All User Data?	Displayed at start of hard disk formatting operation. All data
		previously recorded on the hard disk drive will be erased.
HDD format	Please eject a disc from drive, before formatting	The hard disk cannot be formatted when there is a disc in the
	HDD.	drive. Eject the disc and try again.
HDD check	Start File System Check?	Displayed at start of hard disk check. Depending on the
		condition of the hard disk drive, this operation may require
		several minutes to complete.
USB HDD format, check	No USB HDD.	The USB HDD cannot be recognized.
USB HDD format	Format USB HDD(******)	Appears when USB HDD formatting starts.
		Delete all data on a USB HDD.
Eject	Do you finalize the disc to allow playback on other	When [Finalize] is pressed, the disc is finalized and then ejected.
	players?	If [Eject] is pressed, the disc is ejected without being finalized.
Initialize	This is not a DVD-RW disc.	Only DVD-RW discs can be initialized.
Initialize	There is no disc.	No disk has been loaded. Insert a DVD-RW disc.
Initialize	This disc has been finalized. Reinitialize to	Press the Initialize button to reinitialize the disc.
	record.
Initialize	Disc initialization failed.	DVD disc initialization failed. A disc fault may have occurred.
Initialize	There is video recording data in this disc.	Press the Initialize button to initialize the disc.
Finalize	The disc needs to be finalized.	Finalize the disc.
Finalize	Cannot be finalized.	This disc cannot be finalized.
Finalize	There is no disc.	No disc has been loaded in the drive.
Finalize	The size of menu is too large.	The attached menu size is too large for the current project title
		composition. Change to a menu design with more buttons on
		each page of the menu. Also, by changing to title menu, it may
		be possible to construct the menu with a smaller volume.
Finalize	Disc finalization failed.	DVD disc finalization failed. A disc fault may have occurred.
		Since the DVD-Video was not finalized, playback may not be
		possible on some players.
Copy	The disc needs to be initialized.	The DVD-RW disc has already been recorded.
		To rerecord the disc, initialize it once again.
Copy	Target is not ready or illegal disc.	Check target disc.
Copy	Source is not ready or illegal disc.	Check the copy source. A copyrighted DVD disc or a DVD-RW
		disc with CPRM cannot be selected as a copy source.
Copy	There is no disc.	No disc has been loaded. Insert a disc.
Copy	This is not a blank disc.	When using DVD-R disc, insert an unused disc.
Copy	Not enough space to copy.	The target disc lacks sufficient open capacity to copy.
Copy	Not enough space in HDD.	Not enough free space on the hard disk to store copied data.
Copy	The disc contains data.	Not a blank or initialized disc.
Copy	The disc needs to be finalized.	Copy source disc must be finalized.
Copy	No Image File(HDD) exists.	No image file on the hard disk.
Copy	Copy disc failed.	Disc copying failed. A disc fault may have occurred.
		89

English

PRV-LX10 En