Project Editing
The copied clip will be appended to the end of the project. You can choose whether to record the copied clip as the title. However, if 99 titles have already been recorded, the clip cannot be recorded as another title.
An asterisk “*” will be appended to the front of the name of the copied clip.
If the addition of “*” makes the clip name 33 one- byte characters or longer, the last characters are automatically truncated.
Note :
When “DVD1” or “DVD2” is selected as [Source] during copying clip, the content is not updated when a disc is inserted. Select the drive using [Source] again after disc insertion.
Renaming a Clip
Using the [Project] = [Rename Clip] command on the EDIT Section, the clip name of the currently selected project can be changed. The clip name entered here will be reflected on the text for buttons when the DVD menu type is made the title menu. In fact, the number of characters that can be embedded in the menu will differ depending on the design. Also, depending on the design, excessive characters may be omitted. Always use the preview function to confirm results.
If the clip has a size exceeding 1 Gbyte, it will be output as multiple files. The actually output file names will be the name set with [VOB Name] command, followed by consecutive number + extension (vob). (Example: expt000_001.vob)
Note:
Do not use the FTP during recording since the system may become unstable.
Executing Export command on EDIT section
=[Project] = [Export]
Deleting a Project
Projects are not automatically deleted, but preserved within the hard disk drive. When the available space on the HDD becomes low, use the EDIT section = [Project] = [Delete] command to select and delete unneeded projects in order to open up space on the drive.
English
Using EDIT section = [Project] = [Rename clip] = [Clip 3]
Exporting VOB Files
Using the [Project] = [Export] command on the EDIT Section, clips within the currently selected project can be exported and saved as a VOB file with an individualizing name. The file name can be input using the [VOB Name] command, and saved in the vob folder accessible via FTP.
The [VOB Name] command provides the default file name “exptXXX”; each time the command is executed, the number (XXX) is incremented. However, this automatic operation is not supported if [VOB Name] is edited.
EDIT section = [Project] = [Delete]
Note 1:
A project that is currently being edited cannot be erased.
Note 2:
Projects with protected clips cannot be deleted (see page 67).
69
