Pioneer PRV-LX10 manual English, Confirm Supplied Accessories

D3-4-2-2-2a_A_En

D3-4-2-2-1a_A_En

D3-4-2-1-9a_En

CAUTION

This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

The following caution label appears on your unit. Location: internal of the DVD drive unit

CLASS 1 LASER PRODUCT

LASER KLASSE 1

D3-4-2-1-8_A_En

English

This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and 93/68/EEC).

Compliance with these directives implies conformity to the following European standards.

•EN 60950-1: Product Safety

•EN 55103-1: Electromagnetic Interference (Emission)

•EN 55103-2: Electromagnetic Susceptibility (Immunity)

This product is intended for use in the following Electromagnetic Environment(s):

E1 (residential),

E2 (commercial and light industrial),

E3 (urban outdoors) and

E4 (controlled EMC environment, ex. TV studio).

For pluggable Equipment, The Socket-Outlet Shall Be Installed Near The Equipment and Shall Be Easily Accessible.

“Machine Noise Information Regulation 3. GPSGV: The highest sound-pressure level is 70 dB(A) or less in accordance EN ISO 7779”.

If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal.

The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation).

CAUTION

The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

Confirm Supplied Accessories

Remote control unit (1)

AA batteries (2)

Air filter replacements set (1)

Operating Instructions (1)

Power cord (1)

Ferrite core (1)

•If any of the above accessories are missing, contact your dealer.

3

PRV-LX10 En