Pioneer PRV-LX10 manual Video Filter Level Setting, Audio Encode Setting, Audio Level Setting

Models: PRV-LX10

1 104
Download 104 pages 41.09 Kb
Page 37
Image 37

Recording

Video Filter Level Setting

Use the Video filter to improve image quality when the Video encode rate setting is low or when there is noise in the video source. A higher filter level reduces noise more efficiently but lowers resolution. Set the level where you obtain the greatest amount of noise reduction with the lowest loss of resolution.

Select R or L and press the Up/Down key to adjust the sound in the right or left channel (the numbers are incremented or decremented by each press of the Up/Down key). To adjust both the right and left channels, select “L+R” and press the Up/Down key. Adjust the audio level so that maximum level does not light the top indicator on the level meter.

English

SET UP section = [Recording] = [Video/Audio]

=[Video Filter (NR)]

Audio Encode Setting

Select Dolby Digital or LPCM audio encoding. As shown in the table on pages 78 and 79, the recording time differs depending on the selected encode setting even at the same recording rate.

Note:

“LPCM” cannot be selected when “DV” is selected as the input source.

R)]

SET UP section = [Recording] = [Video/Audio]

=[Audio Encode]

Audio Level Setting

The SET UP section = [Recording] = [Video/ Audio] = [Audio Level] command allows you to set the audio level for recording.

Adjust the audio level when the audio source is too low or so large the sound is distorted to obtain an appropriate sound setting.

SET UP section = [Recording] = [Video/Audio]

=[Audio Level]

Methods for Setting Chapter Mark Insertion

This function sets how chapter marks are set during recording.

In Manual mode, chapter marks can be entered at desired locations by using the main unit’s front panel ENTER button, the remote control unit’s ENTER button, the Enter key on a connected keyboard, The PAUSE button also can be used to enter chapter marks during recording standby.

Chapter marks can be automatically set at intervals range from 3 to 60 minutes. In this case, the ENTER and PAUSE buttons cannot be used to enter chapter marks.

SET UP section = [Recording] = [Others]

=[Auto Chapter]

37

PRV-LX10 En

Page 37
Image 37
Pioneer PRV-LX10 manual Video Filter Level Setting, Audio Encode Setting, Audio Level Setting