HOW TO PERFORM SET-UP MENU ADJUSTMENTS
POWER SAVE FUNCTION SETTING
This monitor has a power save function. For example, if the power is turned on with no signal input or the signal input is no longer detected, the power save function puts the monitor into
The power save function is set in the
The power save function is available only with INPUT C signals and only when the monitor is connected to a computer which has a power management function that conforms to the VESA standard.
POWER SAVE FUNCTION
How the Power Save Function Operates
●Horizontal synchronization signal vanishes.
≠
The “NO SYNC” indication is displayed and about 10 seconds later the “POWER SAVE” indication is displayed (for about 15 seconds).
≠
The monitor enters standby mode.
1While pressing the
SELECT 
button, press
SELECT
the VOLUME/ENTER
button.
The <SET-UP MENU> screen appears.
＜ＳＥＴ－ＵＰ ＭＥＮＵ＞�
� |
|
ＰＯＷＥＲ ＳＡＶＥ | ：ＯＮ� |
ＣＯＮＴＲＯＬ ＬＯＣＫ | ：ＯＦＦ� |
ＳＴＡＴＵＳ ＤＩＳＰＬＡＹ | ：ＯＮ� |
ＷＨＩＴＥ ＢＡＬＡＮＣＥ� |
|
ａｌｌ ｒｅｓｅｔ� |
|
ＥＸＩＴ： ＭＥＮＵ�ＡＤＪＵＳＴ：�－ 
＋� ＳＥＬＥＣＴ：�
(When the horizontal synchronization signal is detected again, the monitor resumes normal operation (the picture reappears).)
●Horizontal/vertical synchronization signals vanish.
≠
The “NO SYNC” indication is displayed and 10 seconds later the “POWER SAVE” indication is displayed (for about 15 seconds).
2 Press the SELECT | ＜ＳＥＴ－ＵＰ ＭＥＮＵ＞� | |
button to select the | � |
|
SELECT |
| |
| ＰＯＷＥＲ ＳＡＶＥ | ：ＯＮ� |
[POWER SAVE] item. | ＣＯＮＴＲＯＬ ＬＯＣＫ | ：ＯＦＦ� |
ＷＨＩＴＥ ＢＡＬＡＮＣＥ� | ：ＯＮ� | |
| ＳＴＡＴＵＳ ＤＩＳＰＬＡＹ | |
| ａｌｌ ｒｅｓｅｔ� |
The selection mark ( 4) moves to |
|
the [POWER SAVE] item. | ＥＸＩＴ： ＭＥＮＵ�ＡＤＪＵＳＴ：�－ ＋� ＳＥＬＥＣＴ：� |
≠
The monitor enters suspended mode.
(When the horizontal/vertical synchronization signals are detected again, the monitor resumes normal operation (the picture is displayed) after about 10
3Perform adjustment with the VOLUME/
ENTER
/
buttons.
ON : The power save function is turned on.
OFF : The power save function is turned off.
4 After adjustment is complete, press the MENU
button to exit the menu screen.
MENU
Notes:
●The power save function is available only with INPUT C signals and only when the monitor is connected to a computer which has a power management function that conforms to the VESA standard.
●The power save function cannot be set when the [POWER SAVE] item is not displayed, such as when the selected input mode (INPUT SELECT) is INPUT A or INPUT B.
●Items that cannot be set or adjusted in the current input mode (INPUT SELECT) are not displayed.
●When external remote control is activated, the power save function is turned off.
●The power save function
The following shows the power indicator lighting and power consumption savings when the power save function is used.
Power Save Function
Mode |
| Normal | Standby | Suspended |
|
| Mode | Mode | Mode |
|
|
|
|
|
Power |
| 100% | Less than | Less than |
Consumption |
| about 90% | about 30% | |
|
|
|
|
|
Power |
| Lit | Lit | Blinks |
Indicator ( | ) |
|
|
|
|
|
|
|
|
Shift Time |
| — | About 15 | About 15 |
from Normal |
|
| seconds | seconds |
Mode |
|
|
|
|
|
|
|
|
|
Return Time |
| — | Immediate | About 10 to |
to Normal |
|
|
| 15 seconds |
Mode |
|
|
|
|
|
|
|
|
|
Note:
To exit from the power save mode, perform one of the following. (Note: if the operating conditions are the same as what they were in the power save mode, the power save mode will be reactivated after about 30 seconds.)
•Input signals (vertical/horizontal synchronization signals) from the computer to the monitor correctly,
•Cancel the power save mode by operating the computer,
•Operate the control buttons on the front of the monitor,
•Disconnect the power cord from the AC outlet and reconnect it.
16
