JVC DT-V2000SU manual Picture Adjustment, Picture ADJ. item

HOW TO PERFORM MAIN MENU ADJUSTMENTS (cont’d.)

PICTURE ADJUSTMENT

You can adjust the picture contrast, brightness, etc.

1 Press the MENU button.

＜ＭＡＩＮ ＭＥＮＵ＞�

MENU �

ＳＩＺＥ／ＰＯＳＩＴＩＯＮ ＡＤＪ．�

The <MAIN MENU> screen appears. ＤＩＳＴＯＲＴＩＯＮ ＡＤＪ．�

ＰＩＣＴＵＲＥ ＡＤＪ．�

ＦＵＮＣＴＩＯＮ ＳＥＬＥＣＴ� ＳＴＡＴＵＳ�

ＤＥＧＡＵＳＳ�

ＥＸＩＴ： ＭＥＮＵ�ＥＮＴＥＲ：�+ ＳＥＬＥＣＴ：�

SELECTING [ sub menu] IN PROCEDURE 4

You can also adjust items in procedure 5 with only the selected item displayed. Use this if the full menu screen makes it difficult to observe the monitor image.

1Select the [ sub menu] item in procedure 4.

2Press the VOLUME/

ENTERbutton.

<MAIN MENU> screen

2 Press the SELECT		＜ＭＡＩＮ ＭＥＮＵ＞�
button to select the	SELECT	�
		ＳＩＺＥ／ＰＯＳＩＴＩＯＮ ＡＤＪ．�
		ＤＩＳＴＯＲＴＩＯＮ ＡＤＪ．�
[PICTURE ADJ.] item.		ＰＩＣＴＵＲＥ ＡＤＪ．�
		ＦＵＮＣＴＩＯＮ ＳＥＬＥＣＴ�
		ＳＴＡＴＵＳ�
The selection mark ( 4) moves to		ＤＥＧＡＵＳＳ�
the [PICTURE ADJ.] item.		ＥＸＩＴ： ＭＥＮＵ�ＥＮＴＥＲ：�+ ＳＥＬＥＣＴ：�
		<MAIN MENU> screen
3 Press the VOLUME/

The <sub menu> screen appears. (A single item is displayed at a time.)

3Press the SELECT button to

SELECT

select the desired item.

4Perform adjustment with the

VOLUME/ENTER / buttons.

�
�
ＣＯＮＴＲＡＳＴ	：＋０７�
－ －�	＋� ＋�

<sub menu> screen

ENTER	button.	ＩＮＰＵＴ Ａ（ＣＯＭＰＯ）�
			＜ＰＩＣＴＵＲＥ ＡＤＪ．＞�
		�
			ＣＯＮＴＲＡＳＴ	：＋１５�
			ＢＲＩＧＨＴ	： ００�
The <PICTURE ADJ.> screen			ＣＨＲＯＭＡ	：－０５�
			ＰＨＡＳＥ	：＋０１�
appears.			ＡＰＥＲＴＵＲＥ	：＋１３�
			ｓｕｂ ｍｅｎｕ�
			ｒｅｓｅｔ�

ＥＸＩＴ： ＭＥＮＵ�ＡＤＪＵＳＴ：�－ ＋� ＳＥＬＥＣＴ：�

RESETTING ITEMS TO THEIR FACTORY-SET (INITIAL) VALUES

You can reset the <PICTURE ADJ.> items to their factory- set (initial) values.

1Select the [ reset] item in procedure 4.

<PICTURE ADJ.> screen

4 Press the SELECT		ＩＮＰＵＴ Ａ（ＣＯＭＰＯ）�
button to select	SELECT		＜ＰＩＣＴＵＲＥ ＡＤＪ．＞�
			ＣＯＮＴＲＡＳＴ	：＋１５�
		�
the desired adjustment			ＢＲＩＧＨＴ	： ００�
			ＰＨＡＳＥ	：＋０１�
			ＣＨＲＯＭＡ	：－０５�
item.			ＡＰＥＲＴＵＲＥ	：＋１３�
			ｒｅｓｅｔ�
The selection mark ( 4) moves to			ｓｕｂ ｍｅｎｕ�
			ＥＸＩＴ： ＭＥＮＵ�ＡＤＪＵＳＴ：�－ ＋� ＳＥＬＥＣＴ：�
the adjustment item.		<PICTURE ADJ.> screen

5Perform adjustment with the VOLUME/

ENTER/buttons.

* Items not displayed because of the selected input mode

(INPUT SELECT) cannot be adjusted. * Adjustable range: –20 — +20

Items	VOLUME/ENTER	Contents
	buttons
CONTRAST		Contrast becomes lower
(	)	(–20 p +20)
		Contrast becomes higher
		(–20 [ +20)
BRIGHT		Brightness becomes darker
(	)	(–20 p +20)
		Brightness becomes brighter
		(–20 [ +20)
CHROMA		Chroma becomes lighter
(	)	(–20 p +20)
		Chroma becomes deeper
		(–20 [ +20)
PHASE		Phase becomes more reddish
(	)	(–20 p +20)
		Phase becomes more greenish
		(–20 [ +20)
APERTURE		Outline becomes more obscure
(	)	(–20 p +20)
		Outline becomes clearer
		(–20 [ +20)

• CONTRAST: adjusts the picture contrast	• PHASE: adjusts the picture phase
• BRIGHT: adjusts the picture brightness	• APERTURE: adjusts the picture
• CHROMA: adjusts the picture chroma	aperture (outline)

2Press the VOLUME/ENTER

button.

The <reset> screen appears.		＜ｒｅｓｅｔ＞�
3Perform adjustment with the		�
		Ａｒｅ ｙｏｕ ｓｕｒｅ？�		ｋｅｙ．�
		“ＹＥＳ“ ｔｈｅｎ	＋�
		“ＮＯ“ ｔｈｅｎ ＭＥＮＵ� ｋｅｙ．�
VOLUME/ENTER	button or
the MENU button.		<reset> screen
MENU

VOLUME/ENTER button… Values are reset. MENU button… Reset is aborted

MENU

(values are unchanged).

* The screen from procedure 4 reappears.

6 After adjustment is complete, press the

MENUbutton twice to exit the menu screen.MENU

Notes:

●The menu screen automatically disappears when no operation is performed after about 30 seconds.

●When adjusting the picture, set each picture adjustment knob on the front panel to the center position

(the knob clicks into place).

●It is possible to memorize the preset picture adjustment for each video input (up to 3 inputs).

●Items not displayed because of the selected input mode (INPUT SELECT) cannot be adjusted. In this case, it is also impossible to perform adjustment with picture adjustment knobs. (: adjustable –: not adjustable)

Picture		INPUT SELECT Button
adjust-	INPUT A		INPUT B	INPUT C
ment
	RGB	COMPO.	VIDEO	RGB (PC)
CONTRAST				
BRIGHT				
CHROMA	–			–
PHASE	–			–
APERTURE	–			–

12