JVC DT-V2000SU manual Controls and Features, Front View

CONTROLS AND FEATURES

FRONT VIEW

<Front Panel>

1

2

3

4

PHASE CHROMA BRIGHT CONTRAST

DT-V2000SU MENU VOLUME/ENTER

ABC

ON

OFF

SELECT INPUT SELECT POWER

7

6

5

1 Speaker

A built-in speaker is located in the right panel when the monitor is viewed from the front.

2MENU button

Displays and turns off the menu screens.

Notes:

●There are two menu screens: the <MAIN MENU> screen and the <SET-UP MENU> screen.

●To display the <MAIN MENU> screen, press the MENU button.

●To display the <SET-UP MENU> screen, when no menu screen is displayed, press the VOLUME/ENTER (–) button while pressing the SELECT (∞) button.

●To select an item in a menu screen, press the SELECT (∞) button.

●To set or adjust a selected item in a menu screen, press the VOLUME/ENTER (–/+) buttons.

5 INPUT SELECT buttons

Select the video signal input to each terminal.

Input A button [INPUT A (RGB/COMPO.)]

Selects the video signal input to the INPUT A (RGB/ COMPO.) terminal. When selected, the INPUT A indicator lights in green.

Input B button [INPUT B (VIDEO)]

Selects the video signal input to the INPUT B (VIDEO) terminal. When selected, the INPUT B indicator lights in green.

Input C button [INPUT C (RGB)]

Selects the video signal input to the INPUT C (RGB) terminal. When selected, the INPUT C indicator lights in green.

6 VOLUME/ENTER (–/+) buttons

Adjust the speaker volume. Also used to set or adjust an item in a menu screen.

3SELECT (∞) button

Selects an item in a menu screen. Each time the SELECT button is pressed, the selection mark moves to the next item below.

7 Picture adjustment knobs

Adjust the picture hue (PHASE), chroma (CHROMA), brightness (BRIGHT) and contrast (CONTRAST).

* For details, refer to page 9.

4POWER switch/POWER indicator

Monitor power switch and power indicator. Press the POWER switch to turn the power ON or OFF.

*When the monitor is ON, there is a slight delay before the picture appears while the monitor runs a self-test.

4