Recording
Selecting Recording Destination
The currently selected recording destination (also the playback source) will be displayed on the front panel’s central indicator (DVD1, DVD2, HDD indicator). The [Drive] command on the Function Menu’s STATUS section also indicates the currently selected recording destination/playback source. Use the front panel’s DRIVE SELECT button, or the [Drive] command in the Function Menu’s STATUS section to select the recording destination. However, note that the DRIVE SELECT button is disabled during display of the Function Menu.
When the “HDD” is selected, recording to performed to HDD only. And either “DVD1” or “DVD2”, or “DVD1&2” can be selected as the recording destination.
When “DVD&HDD” is selected using the EDIT section = [Project] = [Record/Name] = [Record To] command, data is recorded both to the DVD disc and hard disk simultaneously, and hard disk recording remains stored even after the DVD disc has been removed.
When a disc is removed before finalizing, the data recorded so far remains on the hard disk. A new project is automatically created when this disc is reinserted and additional data that is recorded is saved to this project. Thus data recorded prior to removal and data recorded after reinsertion are saved to different projects.
Note:
When a disc is inserted and a recording is made, [Record To] setting can no longer be changed. The [Record To] setting is saved for each drive and can be changed when drive selection changed.
English
EDIT section = [Project] = [Record/Name]
= [Record To]
When recording to hard disk drive, this recorder performs internal management of recorded data (clips) in units called “projects.” Multiple clips (up to a maximum of 255) can be recorded in a single project, and so long as a project is not changed, clips can be recorded continuously within a single project. When you wish to classify your recorded data in
STATUS section = [Drive]multiple groups, change the project by using the [Project] command on the STATUS section, and
continue recording.
STATUS section = [Project]
35
