Pioneer PRV-LX10 manual Recording to DVD Discs, Canceling finalization

Recording

The constructed edit list can be saved with a name

(*.edl) created with the [Auto Capture] = [EDL Save] command on the APP section. Also, a saved edit list can be selected and loaded with the [Auto Capture] = [EDL Load/Delete] = [Load] command. To delete an edit list, using the [Auto Capture] = [EDL Load/ Delete] = [Delete] command on the APP section.

APP section = [Auto Capture] = [EDL Load/Delete]

APP section = [Auto Capture] = [EDL Save]

Note 1:

Edit lists can be composed outside of the recorder and imported (see page 72 “Inporting Image Data, Edit Lists”).

Note 2:

If [EDL] is used when target drive is set to HDD, initialize and finalize commands are ignored.

Recording to DVD Discs

Data can be recorded on an unused or not finalized DVD-R or DVD-RW disc.

A finalized DVD-RW disc must be initialized or finalization must be canceled before reuse.

1Disc initialization

Use the EDIT section = [DVD Disc] = [Initialize] command to initialize DVD-RW discs. Select “Quick Format” or “Full Blank” (all previously recorded material is erased). “Full Blank” takes 30 minutes to 1 hour to complete.

42

EDIT section = [DVD Disc] = [Initialize] = [Initialize]

Initialize confirmation dialog

Initialize progress bar (appears during initialization)

2Canceling finalization

Finalization can be canceled by selecting the EDIT section = [DVD Disc] = [Unfinalize] command. The PRV-LX10 can only canceling finalization discs that it has been finalized on the PRV-LX10 or PRV- LX1.

Finalization cannot be canceled for two drives simultaneously.

Note:

The DVD menu information is lost when a disc is canceled finalization. When a disc has been canceled Finalization, use the EDIT section = [DVD Menu] command to set the DVD menu again.

PRV-LX10 En