Pioneer PRV-LX10 manual Names of Parts Rear Panel Facilities

Names of Parts

Rear Panel Facilities

1 2 3 19 4 5 6 20 7 8 9 10

										SIGNAL GND
			18	17	16	15	14	13	12		11
No.		Name				Function
1	AC IN connector		Connect to power cord.
2	Main power switch		When set to ON, the unit enters standby condition and front panel indicator
			lights orange.
3	AUDIO CH1/L CH2/R IN/OUT		Input/output connectors for analog audio CH1/L CH2/R signals.
	connectors
4	S-VIDEO IN/OUT connectors		Input/output connectors for S-VIDEO video signal. Output is compatible with S2.
5	COMPOSITE VIDEO IN/OUT		Input/output connectors for analog composite video signals.
	connectors		Note: Use coaxial cables (impedance: 75-ohm) to connect with BNC plugs.
6	COMPONENT VIDEO IN/OUT		Input/output connectors for analog component video signals. (*1)
	connectors		Note: Use coaxial cables (impedance: 75-ohm) to connect with BNC plugs.
7	DV connector (*6)		Connect to DV connector of professional use VTR or similar component.
8	Fan motor		Fan motor for cooling internal parts.
9	LTC connector (*2)		Connector for obtaining time code from VHS, VTR, etc.
			Note: Use a coaxial cable (impedance: 75-ohm) to connect with BNC plugs.
10	EXT SYNC IN and through		Use for connecting external sync signal, and for pass-through signals.
	Output connector		Note: Use coaxial cables (impedance: 75-ohm) to connect with BNC plugs.
11	Terminate switch		Use to terminate sync signal. Set to ON when used alone or when connected
			to a terminating unit.
12	SIGNAL GND terminal		Ground terminal for signals. When using the unit in environments exposed to
			high levels of electronic noise, malfunctions may occur to mouse and other
			control devices. In such cases, connect a ground wire between the
			components to reduce the noise. This is not an electric safety ground.
13	REMOTE IN/OUT connectors		RS-422A compatible external control connector. The protocol is compatible
			with SONY format. (*3)
14	PCM/2DIGITAL OUT connector		Digital audio output connector.
			Note: Use a coaxial cable (impedance: 75-ohm) to connect with RCA in plugs.
15	ETHERNET connector		Use for network connection.
16	MOUSE/KEYBOARD connectors		Allows connection of a USB mouse, USB keyboard and USB HDD to the unit. (*4)
17	VGA (GUI) connector		Connect to VGA monitor for expanded operation. (*5)
18	UPS connector		Connect when using UPS.
19	Expansion slot 1		Provided to allow installation of the optional SDI AES/EBU input board (PRA-BD11).
			÷ Consult your dealer regarding installation.
20	Expansion slot 2		Provided to allow installation of the optional SDI AES/EBU output board (PRA-BD12).
			÷ Consult your dealer regarding installation.

16

PRV-LX10 En