ASSEMBLY
11CONTAINER INSTALLATION
1.Install containers on support frame, overlapping containers at center tube.
Note: One container should always overlap the other container at the center tube.
2.Close cover and lock latch handle over support tubes.
CAUTION
BEFORE PERFORMING MAINTENANCE, SERVICE OR ADJUSTMENTS:
•Set parking brake.
•Place motion control levers in “NEUTRAL” position.
•Place clutch control in “DISENGAGED” position.
•Turn ignition key to “OFF” position.
•Make sure blades and all moving parts have completely stopped.
•Disconnect spark plug wire(s) from spark plug(s) and place wire where it cannot come in contact with plug.
12CHUTE/HOOD INSTALLATION
Rotate the chute so the opening is facing downwards toward the container bags.
CAUTION
•DO NOT operate mower with grass catcher partially installed.
•Disengage blades and stop engine before leaving mower seat to empty containers, unclogging chutes, etc.
•Close cover before starting.
•Disengage mower blades when crossing driveways or gravel surfaces and other areas where thrown objects could be a hazard.
•DO NOT attempt to vacuum cans or other potentially hazardous projectiles.
CAUTION
Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recommended parts, when necessary.
10
