Adding Printers in NetWare
Basic Setup with AXIS NetPilot
Install the AXIS NetPilot software on your computer. AXIS NetPilot runs on Windows 98 and Windows NT.
Starting the Follow the instructions below to install the AXIS 5900 with AXIS Installation NetPilot:
1.Start AXIS NetPilot by
2.Locate the Axis Network Print Server in the ‘New Axis Units’ folder. Select it and click the Install button on the AXIS NetPilot toolbar. If your network is large, it could take a few seconds before the print server appears in the folder.
3.Choose the with Installation Wizard option.
The AXIS NetPilot Installation Wizard guides you through the installation process. The following options are available:
Note:
The number of options varies according to the number of environments you enable.
Print Server Name The default print server name consists of the characters ‘AXIS’ followed by the last six digits of the serial number. If you want to change the print server name, just type the new name in the available text field.
Environments Choose which networking environments you want to configure the Axis Network Print Server for, e.g. NetWare, TCP/IP, Windows & OS/2 or Macintosh. If your network comprises various different platforms, you can enable any combination of environments.
NetWare NDS Place NetWare Print Queues on a specific bindery server, or alternatively into an NDS Tree.
The IP Address Choose the method the Axis Network Print Server should employ for obtaining an IP address. DHCP, ARP, RARP, BOOTP and
Print Queues The Axis Network Print Server uses the print server name followed by the printer port as the default Print Queue names and print server port names. If you want to change the default printer queue names, just type the new names in the available text fields.
70 | AXIS 5900 User’s Manual |
