Philips 5900 user manual WEP Encryption Level

Basic Installation (Wired & Wireless)

Edit WEP Parameters

Click the Edit WEP Parameters button. You will be prompted for the root password (default pass). Enter the WEP keys and click OK to save your settings.

WLAN Parameters	Description
Edit WEP Parameters	Click the button to access the WEP parameter settings
	WEP security. The default setting is that WEP encryption is disabled.
WEP Encryption Level	Select 64 Bit or 128 Bit security level. 128 Bit encryption level is the
	highest level of security but may reduce the performance level.
Active WEP key	Select the appropriate WEP key as specified by the network
	administrator
WEP key x	Enter the WEP keys (as ASCII or as hexadecimal values) specified by the
	network administrator
Enforce WEP	When enabled, the print server will not allow access to clients without a
	WEP key

Notes:

Once you have clicked the OK button, the WEP parameter settings will be saved and cannot be cancelled by clicking Cancel on the WLAN page.

When you have entered the WLAN settings to match your network, click OK to save your settings.

Proceed to “Configuring your Print Server” on page 26 to set up your Axis Network Print Server and the connected printers for printing.

AXIS 5900 User’s Manual 25