Philips 5900 user manual Setup using NDPS

Adding Printers in NetWare

Setup using NDPS

The AXIS 5900 supports Novell Distributed Print Services (NDPS). You can run NDPS over Pure IP (TCP/IP) or IPX/SPX.

Before the AXIS 5900 can be installed, make sure that NDPS is installed and a Broker is loaded on your NetWare file server.

Axis Network Print Server uses the AXIS NDPS Gateway for printing in networks using either IP or IPX as transport protocols. The printer gateways are included with the NDPS software (from version 5.1 and up) and are automatically installed together with NDPS.

Installing the Axis Having assigned an IP address to the AXIS 5900 as described in Assigning Network Print Server an IP Address to the Print Server, on page 16, you are now ready to

in the NDPS install the Axis Network Print Server for NDPS printing. You can select to Environments install the connected printers as public or controlled access printers.

Follow the instructions below to install the Axis Network Print Server using NDPS:

Important:

•The NDPS Enabled parameter of the Axis Network Print Server is by default enabled. It must be set to Yes in order for the communication between the print server and the NDPS gateway to be enabled. To change this parameter, log in to the print server’s Web pages and choose: Admin Network Settings Detailed View NetWare => NDPS Enabled => Yes.

•If you do not have an NDPS Manager object available, start out with creating one in the Net- Ware Administrator.

50 AXIS 5900 User’s Manual