Regulatory Information

 

 

Safety Notices

Take some time to read through the safety notices before installing the print server. Please observe all safety markings and

 

instructions when using this product.

Important:

Observe “Important:” in the text to avoid operational impairment. Do not proceed until you have fully understood the

 

implications.

Electromagnetic Compatibility

 

(EMC)

 

USA

This equipment has been tested and found to comply with the limits for a Class B digital

 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

 

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

 

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

 

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

 

encouraged to try to correct the interference by one or more of the following measures:

 

- reorient or relocate the receiving antenna

 

- increase the separation between the equipment and receiver

 

- connect the equipment into an outlet on a circuit different from that to which the receiver is connected

 

- consult the dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to

 

ensure compliance with the class B limits..

Europe

This digital equipment fulfils the requirements for radiated emission according to limit B of EN55022, and the requirements

 

for immunity according to EN55024 residential, commercial, and light industry. Compliance is not valid for unshielded

 

network cables.

Japan

This is a class B product based on the standard of the Voluntary Control Council for Interference from Information

 

Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio

 

interference. Install and use the equipment according to the instruction manual. Compliance is not valid for unshielded

 

network cables.

Australia

This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard 1998

 

AS/NZS 3548. Compliance is not valid for unshielded network cables.

Liability

Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform your

 

local Axis office, which can be found on the cover of this document. Axis Communications AB cannot be held responsible for

 

any technical or typographical errors and reserves the right to make changes to the product and manuals without prior

 

notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document,

 

including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis

 

Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the

 

furnishing, performance or use of this material.

Axis’ Trademarks

AXIS ThinWizard, axinstall, AXIS Print Monitor, AXIS AddPrinter.

Other Trademark Acknowledgments

Adobe Acrobat Reader, Aix, Apple, Debian, Ethernet, EtherTalk, IBM, LAN Manager, LAN Server, Linux, Macintosh, Microsoft,

 

Novell NetWare, OS/2, OS/400, AS/400, Red Hat, Solaris, SuSe, UNIX, Microsoft Windows, are registered trademarks of the

 

respective holders.

Support Services

Should you require technical assistance, please contact your Axis dealer. If your questions cannot be answered immediately,

 

your Axis dealer will forward your queries through the appropriate channels to ensure you a rapid response. On the Internet

 

you can find online manuals, technical support, software updates, application software, corporate information, etc..

Patent information

Axis AB has intellectual property rights relating to technology embodied in the product that is described in this document. In

 

particular, and without limitation, these intellectual property rights may include one or more of the patents listed at

 

http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other

 

countries.

Software Acknowledgments

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

USER’S MANUAL AXIS 5900 EN

Part No. 23000, Revision 2.0a

Date: August 2005 - Copyright © Axis Communications AB, 2005

This manual applies to the AXIS 5900 with firmware version 7.00 or higher.

2

AXIS 5900 User’s Manual

Page 2
Image 2
Philips 5900 user manual Regulatory Information