Philips 5900 user manual Click OK and exit when done, Autosense

Management and Configuration

Setting the e-mail

Notification

Parameters

Important:

In order to set the e-mail addresses of the people to whom the trouble- reports will be sent:

1.From your print server’s internal Web page, go to: Admin Network Settings Detailed View e-mail Notification. The following options will appear:

Options	E-mail recipient
Administrator e-mail Address	This address will be used as “Reply to”-address in the e-mails
PAPER JAM	The person responsible for handling paper jams in the printer
OUT OF PAPER	The person responsible for filling the printer with paper
TONER LOW	The person responsible for filling up the toner in the printer
NO TONER	The person responsible for changing the toner in the printer
PRINTER OFFLINE	The person responsible for the overall maintenance of printer

2.Enter the respective e-mail addresses of the trouble-report recipients in the

blank fields as follows: name@company.com

3.Click OK and exit when done.

The SMTP Server parameter in the print server’s internal Web pages must be set so that it corresponds to the SMTP server used in your network! This is set in: Admin Network

Settings Detailed View TCP/IP Network SMTP Server.

Network Speed With the Network Speed parameter you can manually specify the speed at which you will send and receive network packages.

Ethernet Network To change the Network Speed, log in to the print server’s internal Web pages and click Admin General Settings General. From here you have the option of setting the network speed to:

Network Speed

AUTO_SENSE	The print server detects which speed is optimal for each network package
(default value)	you transfer.
10_HALF__DX	10	Half Duplex
10_FULL_DX	10	Full Duplex
100_HALF_DX	100		Half Duplex
100_FULL_DX	100		Full Duplex

WLAN To change the Network Speed, log in to the print server’s internal Web page and click Admin Network Settings Detailed View WLAN. From here you have the option of setting the network speed to:

Network Speed

AUTO_SENSE (default value)	The print server detects which speed is optimal for each network package
	you transfer.
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps

98 AXIS 5900 User’s Manual