Philips 5900 user manual Using AXIS ThinWizard for Print Server Management

Management and Configuration

Using AXIS ThinWizard for Print Server Management

AXIS ThinWizard software allows you to manage and upgrade multiple Axis products. Using a standard Web browser, you can find, install, monitor, configure and upgrade your Axis print servers remotely in any TCP/IP network (WLAN or LAN). AXIS Thin Wizard 3.0 is Windows 2000 / XP / 2003 compatible.

Installing AXIS AXIS ThinWizard software is available on www.axis.com ThinWizard You should only install AXIS ThinWizard on a designated computer on

your network.

To install, follow the instructions given by the Installation Wizard. During the installation, you will be asked to enter a user id and a password — these will be used when logging in to AXIS ThinWizard, so please take a note of them.

Starting AXIS If AXIS ThinWizard is installed on the workstation you can access its ThinWizard Web interface via Start All Programs (using Windows XP; on Windows

2000: Start Programs). If it is installed on another computer, follow the instructions below:

1.Make sure that the computer where you installed the AXIS ThinWizard is up and running on your network.

2.Start a Web browser on a client in your network.

3.Enter the IP address or the host name of the computer where you installed AXIS ThinWizard. (If the server is installed on another port than 80, you must enter the port name after the host name or the IP address).

4.The AXIS ThinWizard start page now appears in the Web browser. Enter the user id and password you specified during installation and click Log in.

AXIS 5900 User’s Manual 107