Philips 5900 user manual SNMP Device Index, Raw Port Number

		The Parameter List
--- LPT2 Menu
L2_CENTR.	: HISPEED (IBM_PC, STNDRD, FAST, HISPEED, HINOACK)
L2_BSYTM.	: 60	(DISABLE, AUTO)
L2_MGM_INFO.	: AUTO
L2_COMMENT.	:	(DISABLE, AUTO)
L2_BIDIR.	: AUTO
L2_READT.	: 3

--- Email Menu

EMAIL_NOTIFICATION. : NO REPLY_ADDRESS. : PAPER_JAM_ADDRESS. : OUT_OF_PAPER_ADDRESS. : TONER_LOW_ADDRESS. : NO_TONER_ADDRESS. :

PRINTER_OFFLINE_ADDRESS. :

--- WLAN Menu

WLAN_NODE_ADDR. : 00 40 8C 5E 44 D6

WLAN_NETWORK_SPEED. : AUTO_SENSE (1_MBPS, 2_MBPS, 5.5_MBPS, 11_MBPS, AUTO_SENSE)

WLAN_NETWORK_MODE. : AD_HOC (INFRASTRUCTURE, AD_HOC)

WLAN_SSID. : AXIS5E44D6

WLAN_CHANNEL. : 11

WLAN_FRAG_THRESHOLD. : 2346

WLAN_RTS_THRESHOLD. : 2432

SNMP Device Index

When using the TCP/IP protocol (and if the printer driver permits), the print server can use SNMP Status to find out if the printer is ready to accept a new job.

By default, Windows uses the value “1” when addressing an SNMP device, which is correct for single port print servers. For a multiport print server, obtain the SNMP Device Index from the table below.

Print Server	LPR Queue Name	Raw Port Number	SNMP Device Index
Single Port:
Parallel	LPT1	9100	1
Single Port:
USB	USB1	9100	1
Dual Port:
Parallel	LPT1	9100	1
USB	USB1	9101	2
Dual Port:
Parallel	LPT1	9100	1
Parallel	LPT2	9101	2

AXIS 5900 User’s Manual 147