Philips 5900 user manual Updating the Firmware, Upgrading the Firmware, Web Pages

Updating the Firmware

Section 9 Updating the Firmware

Upgrading the Firmware

You can upgrade the AXIS 5900 firmware using one of the following methods:

•AXIS ThinWizard (TCP/IP)

•From the print server’s internal Web pages (TCP/IP)

•FTP (TCP/IP)

Note:

Updating instructions are supplied with the firmware release notes.

Upgrading from the Follow these instructions to upgrade the firmware of your print server Print Server’s Internal from its internal Web pages (flash loading over the Web):

Web Pages

1. Open your Web browser, enter the IP address of your print server and press Enter. (See “Using a Web Browser for Print Server Management” on

page 92 for detailed instructions on accessing your Axis print server on the Web).

2. From the Admin mode, click the Firmware Upgrade button. From here you can upgrade your print server with the latest available firmware.

Upgrading using AXIS ThinWizard 3.0 is a tool that enables batch upgrading of several AXIS ThinWizard print servers and can be used for upgrading the print server’s firmware in

TCP/IP networks.

Follow the instructions below to upgrade your print servers using AXIS

ThinWizard:

1.Log in to AXIS ThinWizard.

2.Open the Network Group that contains the print server to be upgraded.

3.Click the Firmware button. The Firmware Wizard starts.

4.Browse through the upgrading tips and click Next > when you are done. Select Latest Available Version. Click Next >.

5.Select the servers you want to upgrade, by checking the correct upgrade boxes. Click Next >.

6.Enter the default User ID and Password of the servers you selected in the previous step. Select whether you want AXIS ThinWizard to verify the

password immediately or when the upgrading job has started, by checking the appropriate box. Click Next >.

AXIS 5900 User’s Manual 89