
Adding Printers in NetWare
Section 6 Adding Printers in NetWare
This section describes how to continue the installation of the AXIS 5900 in the NetWare environment. Identify which transport protocol you are running on your network and which installation method you should use. Continue the installation by selecting the appropriate installing instructions from the table below:
Installation | Transport | Action | |
method | protocol | ||
| |||
|
|
| |
| TCP/IP | See “Setup using NDPS” on page 50 and | |
NDPS | “Public Access Printers” on page 51 | ||
IPX/SPX | |||
| “Controlled Access Printers” on page 54 | ||
|
| ||
|
|
| |
|
| See “Setup using iPrint” on page 66 and | |
| iPrint over LPR | “Install a Printer using AXIS LPR Gateway Configuration | |
iPrint |
| on page 68 | |
|
| ||
| See “Setup using iPrint” on page 66 and | ||
|
| ||
| iPrint over IPP | “Install a Printer with AXIS IPP Gateway Configuration | |
|
| on page 67 | |
|
|
| |
| IPX/SPX | To install using the AXIS NetPilot Installation Wizard, | |
| Basic | ||
| see “Basic Setup with AXIS NetPilot” on page 70 | ||
Configuration | |||
| |||
printing |
|
| |
IPX/SPX | If you need a more advanced installation that is not covered by | ||
| Advanced | the AXIS NetPilot Installation Wizard, see | |
| configuration | “Advanced Installation using AXIS NetPilot” on page 71 | |
|
|
|
See “NetWare Administration” on page 75 for information on Novell’s administration tools.
If you intend to operate your AXIS 5900 in a
AXIS 5900 User’s Manual | 49 |