Philips 5900 user manual Configuring your Print Server

Basic Installation (Wired & Wireless)

Configuring your Print Server

Configuration Once you have set the IP address of your Axis Network Print Server print Methods server, it can be managed and configured over the LAN or WLAN using a

number of different methods. The method that you choose should be dictated by your printing requirements and your supported network environments. Select the appropriate method from the table below:

	TCP/IP	See “Adding Printers in Windows” on page 27
Windows
	NetBIOS/NetBEUI	See “Adding Printers in Windows” on page 27
	IPP	Proceed with “IPP - Internet Printing Protocol” on page 123
	IP/IPX	See “Setup using NDPS” on page 50 and then
	in PSERVER mode	“Queue-based Printing Methods” on page 74
NetWare
	IP/IPX	See “Setup using NDPS” on page 50 and then
	in Remote Printer
		“Queue-based Printing Methods” on page 74
	mode
Macintosh	AppleTalk	See “Adding Printers in Macintosh” on page 42
UNIX/Linux	TCP/IP	Proceed with “Adding Printers in UNIX/Linux” on page 76
	IPP	Proceed with “IPP - Internet Printing Protocol” on page 123

26 AXIS 5900 User’s Manual