Philips 5900 user manual Type TOMCAT33 -STOP Enter Type NVXADMDN Enter

Adding Printers in NetWare

4.Shutdown Tomcat and the NetWare Enterprise Web Server on the NetWare file server by executing the following commands:

Type "NSWEBDN" <Enter>

Type "TOMCAT33 -STOP" <Enter> Type "NVXADMDN" <Enter>

Install a Printer with AXIS IPP Gateway Configuration Snap- in

5.Map the next available drive (e.g. G:) to the root of volume SYS on your

NetWare server.

From the temporary directory where axisIPP-snap-in.ziphas been unzipped, run the batch file AxisIPP.bat (default G:).

If the drive G: is not available, you have to edit the batch file and change the drive to next available one.

Check that each line in the batch file is executed without failure.

6.Restart Tomcat and the NetWare Enterprise Web Server on the file server by executing the following commands:

Type "TOMCAT33" <Enter> Type "NVXADMUP" <Enter> Type "NSWEB" <Enter.

7.Access the iManager Web page on the NetWare server by opening the following URL:

https://<IP address of NW server>:2200/eMFrame/iManager.html You have to authenticate.

8.Click on iPrint Management on the left pane and select Create Printer.

9.On the right pane, verify that the newly installed AXIS IPP Gateway Configuration is under the Gateway type drop-down menu.

If not, it may be necessary to restart the NetWare server.

Now you are ready to use the AXIS IPP Gateway Configuration for installing iPrint printers. You have to have Administrator rights to install the printers through iPrint.

1.Connect a printer to any port of the AXIS 5900.

2.Connect the print server to the network.

3.Connect the power adapter.

4.Start the printer and the print server.

5.Log in as Admin.

6.Use a Web browser and the local host URL to login into iManager on your NetWare server.

7.Open your browser to the following URL:

https://<IP address of NW server>:2200/eMFrame/iManager.html You have to authenticate.

8. Click on iPrint Management on the left pane.

AXIS 5900 User’s Manual 67