Philips 5900 user manual Go to Start Printers and Faxes, Select Printer and then Properties

The Parameter List

Print Server	LPR Queue Name	Raw Port Number	SNMP Device Index
Three Port:
Parallel	LPT1	9100	1
Parallel	LPT2	9101	3
Serial	COM1	9102	2

Enable SNMP Status SNMP Status is enabled through Windows’ printer port settings.

Example You have a three port print server and want to enable SNMP Status for LPT2. The table above tells you to set the SNMP Device Index to 3.

Using Windows XP as an example:

1.Go to Start Printers and Faxes.

2.Select Printer and then Properties.

3.Select Port and mark the Port you would like to change.

4.Click Configure Port...

5.Ensure that SNMP Status Enabled is ticked and enter the correct index number in SNMP Device Index, taken from the table above (3 in this example).

6.Click OK and Close.

148 AXIS 5900 User’s Manual