Philips 5900 user manual Installation Overview, “Setting up Using the Ethernet Interface” on page

Basic Installation (Wired & Wireless)

Installation Overview

	Select the appropriate method to establish a connection between the
	workstation / laptop and the Axis Network Print Server. The following
	descriptions provide an overview of the installation procedures:
	• “Setting up Using the Ethernet Interface” on page 14
	• “Setting up over the WLAN” on page 15
Setting up Using the	• To establish communication with the network, an IP address must be
Ethernet Interface	assigned to your Axis Network Print Server. See “Assigning an IP
	Address to the Print Server” on page 16.
	• Once the connection has been established, proceed with creating a
	certificate. See Configuring the Axis Network Print Server for Wireless
	Printing, on page 23.
	• Next, enable https in the print server for secure Web services. See
	Configuring the Axis Network Print Server for Wireless Printing, on page
	23.
	• Set the WLAN Network Mode and enter the SSID, WLAN channel and
	WEP keys according to your network, see “Configuring the Axis
	Network Print Server for Wireless Printing” on page 23
	• The Axis Network Print Server must be restarted for the WLAN settings
	to take effect. On power up, the Axis Network Print Server will
	automatically select WLAN communication if there is no Ethernet cable
	connected. Disconnect the network cable and disconnect and reconnect
	the Axis Network Print Server power supply.

14 AXIS 5900 User’s Manual